Trends towards more progressive grass silage-making practices identified in a new dairy farmer survey should help UK producers improve milk from forage performance, but care is needed to ensure producers maximise the benefits.

This was the joint message from Germinal and Volac at a briefing on the results of a new multi-cut grass silage-making survey, which points to the increasing popularity of taking first cuts earlier and making more frequent subsequent cuts.

In the survey of over 150 dairy farmers, of whom an overwhelming 89% expressed a desire to increase their milk from forage, 60% stated that first cuts have become earlier over the past three years and 44% reported shortening their cutting intervals.

Ben Wixey from Germinal GB said: “We are clearly seeing a significant shift towards a more progressive approach to grass silage-making amongst UK dairy farmers. This move to earlier and more frequent cutting is often referred to as ‘multi-cut’.

“The clear majority are making these changes for very good reasons. Among those farmers already taking more silage cuts per year, or intending to, the top reasons given were: to make better quality silage (71% of respondents); to make more milk from grass silage (68%); and to reduce bought-in feed costs (65%). Far fewer, just 40%, were doing it to increase their overall grass silage quantity.”

The survey also found that of the 44% of respondents who had already changed to a shorter cutting interval in the past three years, 92% were seeing a level of improvement in grass silage quality, with 54% saying quality was much better.

Mr Wixey said: “Success starts by ensuring leys are in the best possible condition, which for many will mean more frequent reseeding than is commonly practised on most dairy farms. It will then include everything from how fields are managed the previous autumn through to how the higher energy grass silage is fed.”

Echoing this, Volac’s Derek Nelson highlighted silage preservation as a key example of where clarity is required with a multi-cut approach, as survey results revealed some confusion.

He said: “Fundamentally, the steps involved in making grass silage don’t change if adopting a multi-cut approach, but some steps may need extra attention to detail. When wilting, for example, because individual cuts are likely to be lighter, you can reach the optimum 28-32% dry matter for ensiling much quicker. So it’s important not to over-wilt.

“Similarly, because crops are cut younger, they are likely to be higher in protein and metabolisable energy (ME). Higher protein is a good thing, but it can negatively affect the fermentation, and therefore the preservation of nutrients. So there’s a clear case for boosting fermentation efficiency with a proven additive. Yet only 35% of respondents in the survey recognised that taking more cuts can increase the need for a silage additive.”

The cost of additive treatment per cut is likely to be lower with a multi-cut system because individual cuts will weigh less and an additive is applied per tonne.

Mr Nelson said: “Another area to pay attention to is chop length. Younger, leafier crops are likely to be easier to consolidate in the clamp than older, stemmy ones, so there’s less of a need to strive for very short chop lengths.

“Also, at feedout, the resulting silage will have a higher energy density, so allowing savings in bought in feed costs, but it may need supplementing with additional fibre.”

Ben Wixey stressed the importance of ley composition as an important prerequisite to success with a multi-cut system:

“Firstly, silage fields must have the potential for early season growth of high D-value grass,” he concluded, “so leys should comprise of modern perennial ryegrasses selected with the right attributes from the Recommended Grass and Clover List. Then it’s about ensuring every step of the process maximises the potential of turning quality grass into high energy forage.

“Carried out correctly, a more progressive approach to grass silage-making can significantly increase milk from forage figures for most UK dairy farmers.”